This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
I used plastic eggs of 2.36 inches (6cm) - the exact size of the egg in the photogallery. For this egg size, a 6x10 and 4x4 hoop design is suitable.
For the design of the 5x7 hoop - the size of the egg is 1.96 inches (5 cm)
I recommend watching video tutorial: https://www.facebook.com/100002572583449/videos/oa.2324309031149013/2057927340969665
Ribbon -width of 0.11 inches and length of 9.84 inches.
Small bow + glue gun + needle and thread.
Size part and stitches in the hoop:
6x10 hoop: 5.99x6.74 inches/23989 stitches
5x7 hoop: 5.60x4.98 inches/20799 stitches
4x4 hoop: 0.85x3.36 inches/3948 stitches
Formats: DST, EXP, HUS, JEF, PES, SHV, VIP, XXX, VP3+PDF
This design can also be purchased in this set: https://embroiderybytm-designsbyteresa.com/collections/fsl-easter/products/large-set-lace-easter-eggs
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.