This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
I recommend using a felt of 1 to 1.2 mm (0.0394 inch or 0.0472 inch) - braun, glue gun, beads, various decorations, strong thread.
If you want to have the design double-sided so I recommend embroidering all parts and follow the instructions.
If you do not want to have a double-sided design you do not need to embroider ,,large egg part back" and ,,eggs without loop"
5x7 hoop for large EGG and 4x4 hoop for small eggs
Size and stitches :
Large egg 5x7 hoop - top : 4.95x6.56 inches/ 37045 stitches
Large egg 5x7 hoop - back : 4.95x6.31 inches/34735 stitches
egg 1 - 4x4 hoop - with loop: 2.32x3.11 inches/ 10976 stitches
egg 2 - 4x4 hoop - with loop : 2.32x3.11 inches/ 11120 stitches
egg 3 - 4x4 hoop - with loop : 2.32x3.11 inches/ 11494 stitches
egg 1 - 4x4 hoop - without loop: 2.32x2.96 inches/ 10842 stitches
egg 2 - 4x4 hoop - without loop : 2.32x2.96 inches/ 10687 stitches
egg 3 - 4x4 hoop - without loop : 2.32x2.96 inches/ 11381 stitches
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.