This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Sewing machine or needle and thread.
PDF tutorials in the ZIP file
Size hoop : 5x7 hoop for large lantern and 4x4 hoop for small lantern
Size parts for large lantern :
part 1: 3.83x5.51 inches / 44907 stitches - embroidered 4 pieces
bottom : 3.82x2.54 inches / 10300 stitches-embroidered 1 piece
Size parts for small lantern:
part 1: 3.62x3.82 inches / 31362 stitches-embroidered 4 pieces
bottom : 3.57x2.08 inches / 8462 stitches - embroidered 1 piece
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.