All collections

Wings earrings / three variations / design on organza / with loop and without loop

SKU: 633tm

Difficulty: beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

Organza - two layers. Jewelry components. Small rhinestone. Glue on rhinestone.

Size hoop:
4x4 hoop

Size and stitches :
wing 1 with loop/ part 1: 0.45x0.87 inches/505 stitches
wing 1with loop/part 2: 0.59x1.56 inches/814 stitches
wing 1 without loop/ part 1: 0.45x0.78 inches/385 stitches
wing 1 without loop/part 2: 0.59x1.43 inches/694 stitches

wing 2/ part 1: 0.51x0.91 inches/491 stitches
wing 2/part 2: 0.82x1.61 inches/797 stitches
wing 2 without loop/ part 1: 0.51x0.81 inches/383 stitches
wing 2 without loop/part 2: 0.82x1.49 inches/683 stitches

wing 3/ part 1: 0.56x1.42 inches/684 stitches
wing 3/part 2: 0.70x2.19 inches/1120 stitches
wing 3 without loop/ part 1: 0.56x1.30 inches/570 stitches
wing 3 without loop/part 2: 0.70x2.08 inches/1015 stitches

The zip folder contains :
Color chart PDF
Copyright PDF
Instructions how to embroider organza PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you