This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
The video tutorial can be found here-https://www.facebook.com/media/set/?set=oa.2015050532074866&type=3
I used Glass size around the perimeter 10 inches + LED Tealights
The pieces are sewn together on the sewing machine.For coaster felt we need white felt 4x4 inches
Size hoop: 5x7 and for coaster 5x7 hoop
Size part and stitches in the hoop:
Size 1 part :5.37x4.66 inches/ 29797 stitches- Embroidered 3 pieces
Coaster lace: 4.38x4.26 inches/25556 stitches
Bottom diameter: 5.9 inches
Height: 4.33 inches
Formats: DST,EXP,HUS,JEF,PES,SHV,VIP,XXX, VP3,CSD+PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.