Difficulty: Advanced

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. 

I used Glass size around the perimeter 10 inches + LED Tealights+ LED Tealights

The pieces are sewn together on the sewing machine.

Size hoop: 5x7

Size part and stitches in the hoop:
Size 1 part : 4.01x 4.86 inches/22357 stitches - Embroidered 4 pieces

Final size: 
Bottom diameter:5.7 inches
Height: 4.72 inches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you