Difficulty:
Intermediate
Although it seems to be a simple design, the design is quite difficult to digitise and you really need to follow the rules for embroidering lace - that is : secure the stabilizer in the hoop very well and also use a very good quality stabilizer, have the correct thread tightening settings for embroidery, do not embroider more than 1 design in the hoop that is shown in the description.
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. Failure to do so will result in the design being not same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Size hoop:
4x4 hoop
design with loop: 3.88x2.92 inches / 23569 stitches
design without loop: 3.88x2.92 inches / 23392 stitches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Instructions how to embroider lace PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.
Thank you
