All collections

Wedding garter No.2/ Embroidery on the organza / two sizes/ 5x7 hoop and 6x10 hoop/ + mini butterfly


Difficulty: Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. 

I recommend that you leave the parts in the water for a long time to completely remove the stabilizer and then put it in the softener. The design will be very delicate.

Embroidery on organza and similar materials - to embroider we need organza, tulle, voile, etc. + water-soluble stabilizer.

For this design we embroider 3 parts for big design and 4 parts for small design, then sew the parts together on the sewing machine.

The video tutorial for organza can be found here- " how to embroider on the organza"

Ribbon width 0.59 and 0.6 inches and rubber width 0.27 inches.
And sewing machine.

Size hoop:
Size hoop for small design : 5x7 hoop
Size hoop for large design : 6x10 hoop
Size hoop for butterfly : 4x4 hoop

Size and stitches:
part for small design: 1.74 x 6.98 inches/ 7487 stitches
part for large design: 2 x 9.65 inches/ 11877 stitches
Mini butterfly : 1.62 x 1.22 inches / 4616 stitches

Formats: PES,CSD,DST,EXP,HUS,JEF,VIP,VP3,XXX,SHV + PDF instruction

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you