This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
What will we need?
-feather / 10 pieces
-metal or wooden rings (I used wooden)
use a circle diameter about 0.78 inches larger than the design size.
design zodiac for 6x10 hoop
design zodiac for 5x7 hoop
constellation with text 4x4 hoop
Size and stitches:
Zodiac 6x10 hoop: 6x6 inches /61342 stitches
Zodiac 5x7 hoop: 4.99x4.99 inches49192 stitches
Constellation with text 4x4 hoop: 3.91x3.91 inches/23629 stitches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.