Difficulty: Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

Size hoop:
5x7 hoop
6x10 hoop

Size and stitches embroidery :
scarecrow large with loop: 3.91x8.58 inches / 42693 stitches
scarecrow large without loop: 3.91x8.41 inches / 42522 stitches
scarecrow small with loop: 5x6.94 inches / 37571 stitches
scarecrow small without loop: 5x6.94 inches / 37416 stitches

Complete sizes:
6x10 hoop: 3.91x8.58 inches
5x7 hoop: 7.62x3.53 inches

The zip folder contains :
Formats: PES, DST, EXP, HUS, SHV, JEF, VIP, VP3, EMB
Color chart PDF
Copyright PDF
Instructions how to embroider lace PDF
Instructions PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you