This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Size and stitches FSL design without loop:
tear 1: 0.57x0.84 inches/ 799 stitches
tear 2: 0.50x0.74 inches/ 651 stitches
tear 3: 0.44x0.66 inches/ 582 stitches
tear 4: 0.33x0.57 inches/475 stitches
tear 5: 0.30x0.45 inches/ 357 stitches
Size and stitches FSL design with loop:
tear 1: 0.56x1.00 inches/ 939 stitches
tear 2: 0.50x0.89 inches/ 787 stitches
tear 3: 0.44x0.80 inches/ 719 stitches
tear 4: 0.39x0.69 inches/ 593 stitches
tear 5: 0.30x0.56 inches/ 469 stitches
Size and stitches design on fabric:
tears 1: 0.69x1.96 inches/ 1153 stitches
tears 2: 0.62x0.89 inches/ 577 stitches
tears 3: 1.98x0.99 inches/ 1344 stitches
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.