The folder contains a file with a loop for hanging - here you only need to add a ribbon for hanging. Or the other version without the loop and you can use this design like I did - you put a little glue on the back and stick a skewer and add a ribbon.
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Size hoop: 4x4 hoop
Size and stitches with loop for hanging:
Teapot: 3.54x3.89 inches/18614 stitches
Teacup: 2.50x2.07 inches/7568 stitches
Size and stitches without loop for hanging:
Teapot: 3.54x3.88 inches/18478 stitches
Teacup: 2.50x1.85 inches/ 7417 stitches
Complete sizes with loop for hanging:
Teapot: 4.02x3.60 inches
Teacup: 2.50x2.07 inches
Complete sizes without loop for hanging:
Teapot: 3.60x3.79 inches
Teacup: 2.50x1.85 inches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Photo instructions how to embroider lace PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.