This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
What will we need?
-needle and thread-use a firmer thread
-wooden circle ( can be purchased online - wooden ring dream catcher ) -I use wooden circles that are always 0.39 - 0.59 inches larger than the size of the lace circle.
-beads of different sizes
Size and stitches :
dream 8x12 hoop: 7.77x7.89 inches / 61741 stitches
dream 7x12 hoop: 6.69x7.10 inches / 54299 stitches
dream 6x10 hoop: 6x5.89 inches / 44965 stitches
dream 5x7 hoop: 5x4.90 inches / 37304 stitches
small sun 4x4 hoop: 3.41x3.41 inches / 14511 stitches
small sun 2.6 inches 4x4 hoop: 2.61x2.60 inches / 10132 stitches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.