Set designs mini rose/ wine glass shades, doily, coaster and napkin holder /5x7 hoop
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Size hoop : 5x7 hoop
Size and stitches parts:
part 1: 5.41x4.61 inches/27305 stitches-we embroider 4 pieces
center : 1.33x1.31 inches/3453 stitches
Size complete doily : 9.8 inches
Wine glass shades+coaster : I used Glass size around the perimeter 10 inches + LED Tealights
Size hoop: 5x7 hoop
Size part and stitches in the hoop:
Size 1 part : 3.78x4.87 inches/ 20481 stitches- Embroidered 4 pieces
Coaster : 3.89 inches/20557 stitches
Final size wine glass shades :
Bottom diameter: 5.8 inches
Height: 4.8 inches
Coaster: 3.89 inches
Napkin holder : 5x7 hoop
5.51x 1.17 inches / 12768 stitches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Instructions how to embroider lace PDF
Instructions for design PDF
These design can also be purchased individually: https://embroiderybytm-designsbyteresa.com/products/wine-glass-shades-mini-rose-coaster-5x7-hoop?_pos=2&_sid=a2bb5b4ba&_ss=r
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.