Difficulty: Advanced

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

Size hoop:
Large Mrs. Santa  Claus : 6x10 hoop
Middle Mrs. Santa  Claus . 5x7 hoop
Small Mrs. Santa  Claus . 4x4 hoop

Size part and stitches in the hoop:
Large Mrs. Santa  Claus : 4.49x8.15 inches/48139 stitches
Middle Mrs. Santa  Claus . 3.68x6.67 inches/37304 stitches
Small Mrs. Santa  Claus . 3.90x3.87 inches/22839 stitches

Final size:
Large Mrs. Santa  Claus : 4.49x8.15 inches
Middle Mrs. Santa  Claus . 3.71x6.61 inches
Small Mrs. Santa  Claus : 4.67x2.55 inches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF

This design can also be purchased in this set:

https://embroiderybytm-designsbyteresa.com/products/mr-and-mrs-santa-claus-three-sizes?_pos=5&_sid=51d6d0162&_ss=r

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you