Difficulty:
Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. I use a reinforced - firm felt 1 mm and a weight of 190gr./m2 I recommend using a felt of 1 to 1.2 mm (0.0394 inch or 0.0472 inch).Glue gun, needle and thread, LED candle, polyester wadding. After completing, I used glitter spray - it's a glitter spray on fabric, metal, wood and glass. And a piece of felt as a pad under the lantern.

Size hoop: 5x7 hoop

Size parts and stitches lantern house :
house 4/1: 3.35x6.98 inches/19599 stitches - embroidered 2 pieces
house 4/2: 2.91x1.61 inches/ 6618 stitches -embroidered 2 pieces
Size parts and stitches window decoration :
house 4/1: 3.35x6.98 inches/19599 stitches - embroidered 1 piece

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace+felt PDF
Instructions for design PDF

This design can also be purchased in this set: https://embroiderybytm-designsbyteresa.com/products/large-set-lantern-or-window-decoration-combination-of-felt-and-lace?_pos=2&_sid=81f94016a&_ss=r

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you