All collections

FSL bowl with Ribbon/ two sizes


Difficulty: Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

The video tutorial can be found here-

 The pieces are sewn together on the sewing machine.

Glue gun. Ribbon width 0.35 inches and lenght 3.34 inches - 6 pieces and 12 pieces small bows.

Size hoop:
Large bowl for 5x7 hoop 
Small bowl for 4x4 hoop

Size part and stitches :
Large bowl :
part : 3.62x4.03 inches/17900 stitches - embroidery 6 pieces
bottom: 2.96x2.57 inches/9201 stitches - embroidery 1 piece
Small bowl :
part : 3.36x3.74 inches/16239 stitches - embroidery 6 pieces
bottom: 2.76x2.39 inches/8196 stitches - embroidery 1 piece

Total size bowl:
Large: upper bowl diameter : 3.93x7.48 inches
Small: upper bowl diameter : 3.70x7 inches


This design can also be purchased in this set:

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you