Jewelry Star FSL
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Components for the production of jewelry - fastenings, connecting rings, components for earrings, etc.
earring + star + component star : 4x4 hoop
bracelet : 5x7 hoop
Size and stitches embroidery:
Earrings: 2.07x1.06 inches/3588 stitches = 1 piece / 1.06x0.99 inches - 4x4 hoop
Component star: 0.84x0.97 inches/1621 stitches - 4x4 hoop
Star: 0.98x0.94 inches/1646 stitches - 4x4 hoop
Bracelet colors small : 0.82x5.02 inches/9920 stitches - 5x7 hoop
Bracelet small : 0.82x5.02 inches/9920 stitches - 5x7 hoop
Bracelet colors large : 0.82x6.34 inches/12713 stitches - 5x7 hoop
Bracelet large : 0.82x6.34 inches/12713 stitches - 5x7 hoop
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Photo instructions how to embroider lace PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.