Difficulty: Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

-To embroidering the two pieces of the skirt, you'll need a piece of organza or another fabric of your choice.

-To assemble it, you'll need a needle and thread (I sewed the edges of the skirts together with a few stitches), or you can use a hot glue gun. (Everything is in the PDF instructions.) Or you don't have to sew the skirts together at all—it's up to you.

Size of the hoop:
5x7 hoop

Size part and stitches :
small bow: 1.08x0.99 inches/2197 stitches
skeleton girl: 5x7 inches/29701 stitches
skirt no.1 ( organza): 5x5 inches/5477 stitches
skirt no.2 . fsl: 4.21x4.20 inches/18416 stitches
skirt no.3 - organza: 3.12x2.96 inches/4354 stitches

Complete size: 7.86x5 inches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Copyright PDF
Instructions how to embroider lace PDF and Instructions how to embroider organza PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.


Thank you