All collections

Halloween bow FSL / two sizes/ 6x10 and 5x7 hoop

$7.00

Difficulty: beginner

The photos show a large bow.

The bow consists of 4 parts which are connected with a fusion gun. It is very easy and fast.

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Glue gun.

Size hoop:
Large: 6x10 hoop
Small: 5x7 hoop

Size part and stitches in the hoop - large bow:
part 1: 6x9.66 inches / 49850 stitches
part 2 : 3.04x5.15 inches /21660 stitches
part 3 : 3.04x5.15 inches /21660 stitches
part 4 : 2.05x0.94 inches / 2242 stitches

Size part and stitches in the hoop - small bow:
part 1: 4.95x6.81 inches / 35304 stitches
part 2 : 2.37x3.72 inches /15527 stitches
part 3 : 2.37x3.72 inches /15527 stitches
part 4 : 1.52x0.71 inches / 1437 stitches

Formats: DST,EXP,HUS,JEF,PES,SHV,VIP,XXX, VP3,CSD,EMB+PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.


Thank you