All collections

Gloves with lacing /four sizes / design on organza

SKU: 276tm

Difficulty: Advanced

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

Embroidering only one piece for each hand!
It is really easy.
After drying and removing excess organza, just put ribbon.

Embroidery on organza and similar materials - to embroider we need organza, tulle, voile, etc. + water-soluble stabilizer.

Please guidance on how to embroidery on organza "how to embroider on organza"

4.72 x 7.2 inches Sulky Soft'n Sheer for holes-you can also use another similar material or 100% cotton (canvas), ribbon -width of 0.015 inches and a lenght of 23 inches. I also used the glue - Fray check - but it is not necessary!!!

Size hoop:
Large size glove : 8x12hoop
Middle size glove: 7x12 hoop
Small size glove: 6x10 hoop
Baby size glove: 5x7 hoop

Size and stitches :
Large size glove : 7.50x8.74 inches/23198 stitches
Middle size glove: 6.64x7.73 inches/ 22558 stitches
Small size glove: 5.97x6.96 inches/20833 stitches
Baby size glove: 5x5.82 inches/18326 stitches

The zip folder contains :
Color chart PDF
Copyright PDF
Photo instructions how to embroider on organza PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you