All collections

Glittering organza gloves / two variations / three sizes

SKU: 1050tm

 Difficulty: Advanced

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Ribbon, needle and thread.

Embroidery on organza and similar materials - to embroider we need organza, glitter organza,  tulle, voile, etc. + water-soluble stabilizer.

Please guidance on how to embroidery on organza - see our video.

Size hoop:
6x10 hoop
5x7 hoop

Size and stitches gloves large :
large / variant 1 : 5.28x7.10 inches/29660 stitches
large / variant 3.72x7.28 inches/ 26732 stitches

Size and stitches gloves middle :
middle/ variant 1: 4.98x6.71 inches/28336 stitches
middle/ variant 2: 3.47x6.79 inches/ 25308 stitches

Size and stitches gloves small :
small/ variant 1: 4.71x6.34 inches/27139 stitches
small/ variant 2: 3.24x6.33 inches/ 24023 stitches

The zip folder contains :
Color chart PDF
Copyright PDF
Photo instructions how to embroider on organza PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you