All collections

Flutter Sleeves FSL No.1 / Four sizes

SKU: 669tm

Difficulty: Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

Size hoop These are the dimensions of the hoop I used. Please read the design size and use the appropriate hoop size for your embroidery machine.

Size hoop:
for small : 5x7 hoop
for medium: 5x7 hoop
for large: 6x10
for jumbo: 6x10

Size and stitches:
Small : 4.58x5.99 inches /24446 stitches
Medium: 4.94x6.96 inches /27591 stitches
Large: 5.38x7.85 inches / 30733 stitches
Jumbo: 6.30x9.30 inches / 36811 stitches

The zip folder contains :
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you