All collections

Flower Columbine 3D / 4x4 hoop

SKU: 1144tm

Difficulty: Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. 

To create Columbine we need:

-Glue gun + transparent glue and green glue
-Flower wires green : diameter 0.0236 inches ( 0.6 mm) - 3 piece and length 11.81 inches ( 30 cm )
-Flower wires green : diameter 0.0236 inches ( 0.6 mm) - 3 pieces - and length 2.36 inches ( 6 cm)
- Floristic tape
- Pliers

Here you will find a video tutorial:

Size hoop: 4x4 hoop

Size and stitches parts:
part 1 : 3.62x3.44 inches/9366 stitches - embroider 1 piece
part 2 : 3.72x3.83 inches/ 14881 stitches - embroider 1 piece 
center : 1.54x1.55 inches/1968 stitches - embroider 1 piece
leave : 2.43x1.95 inches/ 5366 stitches - embroider 3 pieces

The zip folder contains :
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you