All collections

Dream catcher with poppies FSL/ three sizes

$8.50

Difficulty: Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

 Here are video tutorials on how to create dream catchers:
FB: https://www.facebook.com/100002572583449/videos/2309144265847970/
Youtube: https://www.youtube.com/watch?v=_HL6aao8wXo
Youtube:  https://www.youtube.com/watch?v=ZDkLO_Mt8bA

What will we need?
-embroidered parts
-Metal rings: circle 1 - 20cm/7.87 inches, circle 2 - 18cm/7.08 inches, circle 3 - 12 cm / 4.72 inches
-thread
-needle and scissors
-beads of different sizes - I used about 80 beads in total.
-feathers , 10 pieces mini jingle bells and a piece of ribbon make a loop for hanging

Hoop: 6x10 hoop for large design 5x7 hoop for middle design and 4x4 hoop for small design 

Size and stitches:
Large 6x10 hoop : 6x6 inches / 62198 stitches
middle 5x7 hoop: 5x5 inches/50513 stitches
Small 4x4 hoop: 3.91x3.91 inches/ 31035 stitches

Formats: PES,DST,EXP,HUS,JEF,VIP,VP3,XXX, EMB +PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you