FSL - lace - free standing lace!
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
For this design, I recommend a high quality and strong stabilizer - it's a involved and large design if you use a 6x10 or 7x12 hoop.
I recommend this design to customers who already have a great experience in embroidering large lace designs. I recommend adjusting the thread cutting on the embroidery machine for all laces. I have set the cut length to 10 mm and higher.
Please! How many stitches can embroider your embroidery machine? Please check! These designs have a large number of stitches.
What will we need?
-glue gun or glue for rhonestone.
-needle and scissors
Hoop: 7x12 hoop for large design 6x10 hoop for middle design and 5x7 hoop for small design and 4x4 hopp for mini design
Size and stitches - two colors:
Large : 6.96 inches / 76760 stitches
Middle: 5.99 inches/65958 stitches
Small: 5 inches/ 50127 stitches
Mini: 3.89 inches/ 29602 stitches
Size and stitches - three colors:
Large : 6.96 inches / 76827 stitches
Middle: 5.99 inches/65962 stitches
Small: 5 inches/ 50182 stitches
Mini: 3.89 inches/ 29617 stitches
Formats: PES,CSD,DST,EXP,HUS,JEF,VIP,VP3,XXX, EMB +PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.