Doily with ribbons / 5x7 hoop
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
The pieces are sewn together on the sewing machine. Glue gun. Ribbon width 0.35 inches and lenght 1.96 inches - 4 pieces and 4 pieces small bows.
Size part and stitches :
part 1: 5.58x3.40 inches/20664 stitches - embroidery 2 pieces
part 2: 6.37x3.43 inches/25042 stitches - embroidery 2 pieces
center: 4.86 inches/35389 stitches - embroidery 1 piece
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Instructions how to embroider lace PDF
Instructions for design PDF
This design can also be purchased in this set: https://embroiderybytm-designsbyteresa.com/collections/large-sets/products/big-set-designs-with-ribbon
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.