This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Use felt in dimensions : For design 6x10 hoop - 6x10 inches ( one piece) For design 5x7 hoop - 5,5x7,5 inches ( one piece) I used a felt of 0.039 inches - thickness.
Size hoop :
for large design : 6x10 hoop
for small : 5x7 hoop
sizes and stitches for 6x10 hoop:
part 1: 4.33x8.89 inches/37257 stitches
part 2: 4.34x4.30 inches/33932 stitches
sizes and stitches for 5x7 hoop:
part 1: 4.33x6.92 inches/32786 stitches
part 2: 4.33x4.30 inches/33932 stitches
large : 4.33 x 8.89 inches
Small : 4.33x 6.93 inches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Instructions how to embroider lace and felt PDF
Instructions for design PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.