All collections

Cutlery holder poinsettia / two sizes / 6x10 hoop and 5x7 hoop

SKU: cut812tm

Difficulty: Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

Tear away stabilizer and felt.
Use felt in dimensions : For design 6x10 hoop - 6x10 inches ( two pieces) For design 5x7 hoop - 5.5x7.5 inches ( two pieces) I used a felt of 0.039 inches - thickness.

Size hoop :
for large design : 6x10 hoop
for small : 5x7 hoop

sizes and stitches for large design:
part 1:4.19x8.77 inches/15982 stitches
part 2: 4.26x4.82 inches/26440 stitches

sizes and stitches for small design:
part 1: 4.19x6.93 inches/13506 stitches
part 2: 4.26x4.82 inches/26440 stitches

The zip folder contains :
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace and felt PDF
Instructions for design PDF

This design can also be purchased in this set:

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you