All collections

Cutlery holder with snowflakes/ 6x10 hoop /design on organza or fabric


Difficulty: Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Fabric or two layers of organza.

Size hoop:
6x10 hoop

Size and stitches:
fabric part 1: 5.33x9.93 inches / 29221 stitches
fabric part 2: 5.31x5 inches / 15547 stitches
organza part 1: 5.33x9.93 inches / 27883 stitches
organza part 2: 5.31x4.99 inches / 14162 stitches


Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you

Left Continue shopping
Your Order

You have no items in your cart