This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
You can use one piece in a 7x12 hoop and join them together to form a smaller crown. Or you can join two to three parts (5x7 hoop) to form a larger crown.
Size hoop for crown:
crown large part: 7x12 hoop
crown small part: 5x7 hoop
Size and stitches parts :
crown large part variation 1 :2.07x11.56 inches one part / 51685 stitches
crown large part variation 2 : 2.07x11.56 inches one part / 51831 stitches
crown small part variation 1 : 2.07x5.82 inches one part / 25616 stitches
crown small part variation 2 : 2.07x5.82 inches one part / 25490 stitches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, VIP, XXX, VP3, EMB
Color chart PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.