This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
What you need:
Felt - I use a reinforced - Hard felt 1 mm and a weight of 190gr./m2 I recommend using a felt of 1 to 1.2 mm (0.0394 inch or 0.0472 inch),white colors. Always use felt slightly larger than the design size. Needle and thread or glue gun and scissors,WSS (water soluble stabilizer)
I used double-sided adhesive tape to attach it to the window.
You can use this design as a decoration for a window, a decoration for a Christmas wreath or as a separate decoration for a door. There are no limits to your imagination.
Size and stitches parts 5x7 hoop :
Part 1: 7.58x11.50 inches/59604 stitches
Part 2: 2.76x2.76 inches/4311 stitches
Size and stitches parts 6x10 hoop :
Part 1: 5.98x9.21 inches/48609 stitches
Part 2: 2.11x2.46 inches/3336 stitches
Size and stitches parts 8x12 hoop :
Part 1: 4.82x6.85 inches/37794 stitches
Part 2: 1.61x1.90 inches/2533 stitches
5x7 hoop: 8.20x4.57 inches
6x10 hoop: 11.01x6.09 inches
8x12 hoop: 13.75x7.58 inches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Photo instructions how to embroider lace+felt PDF
Instructions for design PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.