Difficulty: beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. 

For this design, I used white Sulky Rayon 40 Wt thread and glittery thread from Gunold - Poly Sparkle 30Wt. When using light glittery shades, I use classic white thread for the bobbin. If I use darker glittery threads, I use a similar color for the bobbin – 40 Wt embroidery thread.

Size hoop:
5x7 hoop and 4x4 hoop

Size and stitches in the hoop:
5x7 hoop: 3.75x4.56 inches/ 23417 stitches
4x4 hoop: 3.82x3.93 inches/ 20289 stitches

Complete sizes:
5x7 hoop: 3.75x4.56 inches
4x4 hoop: 3.94x3.41 inches

The zip folder contains :
Formats: PES, DST, EXP, HUS, JEF, SHV, VIP, XXX, CSD, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you