This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
What will we need?
adhesive material ( UHU- patafix) or double-sided adhesive tape
Size and stitches:
Envelope with picture:
part 1: 3.93x3.86 inches/26287 stitches
part 2: 3.93x3.86 inches/24533 stitches
part 3: 1.71x3.87 inches/17341 stitches
Envelope without picture:
part 1: 3.93x3.86 inches/20004 stitches
part 2: 3.93x3.86 inches/20004 stitches
part 3: 1.71x3.87 inches/17338 stitches
Size complete envelope: 3.89x3.77 inches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.