All collections

Car with Forget-me-not/ two sizes



This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

 For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. Failure to do so will result in the design being not same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Wooden skewers, glue gun and ribbon.

Size hoop:
5x7 hoop
4x4 hoop

Size and stitches in the hoop 5x7:
car 5x7 hoop with loop: 2.71x5.31 inches / 23298 stitches
car 5x7 hoop without loop: 2.72x5.31 inches/ 23380 stitches

Size and stitches in the hoop 4x4:
car 4x4 hoop with loop: 3.85x3.80 inches / 22033 stitches
car 4x4 hoop without loop: 3.85x3.80 inches/ 22134 stitches

complete sizes:
5x7 hoop with loop: 2.71x5.31 inches
5x7 hoop without loop: 2.72x5.31 inches
4x4 hoop with loop: 2.50x5.12 inches
4x4 hoop without loop: 2.50x5.12 inches


Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you