This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Ribbon- long 9.84 inches-two pieces for large design and long 7.87 inches for small design.
For both designs, I used a straight glass of 2.16 inches and a height of 2.55 inches - you can also use a slightly larger glass - this design on both sides of the lacing and you can adjust the size for the glass.
Size hoop : 5x7 hoop for large design and 4x4 hoop for small design
Size and stitches for large design :
part 1: 3.78x4.93 inches/45790 stitches
part 2 : 3.78x4.93 inches/43211 stitches
wings: 3.29x2.66 inches/ 14322 stitches-two pieces
Size and stitches for small design :
part 1: 2.91x3.80 inches/32101 stitches
part 2 : 2.91x3.80 inches/32227 stitches
wings: 2.69x2.14 inches/11150 stitches
Formats: DST, EXP,HUS,JEF,VIP,VP3,SHV,XXX,PES,CSD+PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.