The folder contains a design for a 5x7 hoop - this design consists of three parts that need to be joined together.
The folder also contains a design for a 6x10 hoop and this design does not need to be joined together - the butterfly is already joined in the hoop.
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Glue gun or needle and thread.
5x7 hoop and 6x10 hoop
Size and stitches 5x7 hoop:
Wing: 4.40x6.41 inches/36179 stitches - we embroider two pieces
Body: 1.05x3.43 inches/ 4110 stitches - we embroider one piece
Size complete butterfly 5x7 hoop: 8.50x6.44 inches
Size and stitches 6x10 hoop:
Butterfly: 6x7.32 inches/59286 stitches
Formats: DST,EXP,HUS,JEF,PES,VIP,XXX, VP3,CSD,EMB+PDF
This design can also be purchased in this set: https://embroiderybytm-designsbyteresa.com/collections/butterfly-sets/products/big-set-of-12-large-butterflies-5x7-hoop
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.