This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. For this design I used 100% cotton - 195gr / m2
You can also use high quality satin.
-Ribbon of at least 27.55 inches long.
-needle and thread or sewing machine
-Very sharp small scissors - best with a curved tip.I recommend using a temporary adhesive for the fabric...
Bib jumbo : 8x12 hoop
Bib large : 8x8 hoop
Bib middle : 6x10 hoop
Size and stitches for Bib with cross:
Bib Jumbo: 7.80x9.84 inches / 35635 stitches
Bib large: 7.87x7.87 inches / 33335 stitches
Bib middle: 5.97x6.67 inches/ 27985 stitches
Size and stitches for Bib without a cross:
Bib Jumbo: 7.80x9.84 inches /36092 stitches
Bib large: 7.53x7.79 inches / 33863 stitches
Bib middle: 5.96x6.67 inches/27904 stitches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Photo instructions how to embroider lace+fabric PDF
Instructions for design PDF
This design can also be purchased in this set: https://embroiderybytm-designsbyteresa.com/collections/sets-for-baby/products/set-on-christening-baby-booties-baby-bib-handkerchief
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.