This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Felt. For this design I used 100% cotton - 195gr / m2
You can also use high quality satin.
-needle and thread
-Very sharp small scissors - best with a curved tip- and ribbon 12 inches - 2 pieces.
Not for children walking.
Size: 0-3 months
Always measure the baby leg.
hoop : 5x7 hoop
Size and stitches:
part 1: 4.27x3.97 inches /10337 stitches
part 2: 4.10x2.85 inches / 12644 stitches
part 3: 4.10x2.85 inches /12644 stitches
sole: 3.67x3.67 inches / 7700 stitches
Who uses large hoops can embroider parts 2 and 3 in the hoop 6x10 - as one large piece. If you don't have these large hoops, use a hoop of 5x7 hoop.
Size and stitches for large part:
large part 3-4: 2.85x8.09 inches / 25101 stitches
complete size: 3.99x2.06 inches
Formats : DST,EXP,HUS,VIP,VP3,SHV,PES,JEF,CSD,XXX+PDF
This design can also be purchased in this set: https://embroiderybytm-designsbyteresa.com/collections/sets-for-baby/products/large-set-baby-designs-vintage
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.