Difficulty:
Beginner
8 pairs of earrings
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. Failure to do so will result in the design being not same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
Size hoop:
4x4 hoop
Acorn: 0.64x1.15 inches / 1394 stitches
Boletus: 1.15x1.43 inches / 2360 stitches
Cone: 0.70x1.21 inches / 2088 stitches
Leave: 0.61x1.30 inches / 1640 stitches
Physalis: 0.81x1.15 inches / 1870 stitches
Rose hip: 0.99x1.41 inches / 2225 stitches
Sweet chestnut: 0.88 0.98 inches / 1465 stitches
Toadstool: 1.19x1.82 inches / 2894 stitches
Formats: DST,EXP,HUS,JEF,PES,VIP,XXX,VP3,CSD,EMB,SHV+PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.
Thank you
