All collections

Angel FSL / two sizes and separate wings

$10.30

Difficulty: Advanced

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.

Size hoop:
for large design : 6x10 hoop
for middle design : 5x7 hoop

Size part and stitches in the hoop for large angel and formats:
Angel large : 4.07x9.87 inches / 51842 stitches
Wing left : 2.87x6.65 inches / 29989 stitches
Wing right : 2.87x6.65 inches / 29989 stitches

Size part and stitches in the hoop for middle angel and all formats:
Angel middle : 4.99x6.90 inches / 36620 stitches
Wing left : 2.37x5.14 inches /21024 stitches
Wing right : 2.37x5.14 inches /21024 stitches

Large angel - The size of the finished angel: 5.90x9.87 inches

Middle angel - The size of the finished angel : 4.79x7.61 inches

Formats: DST,EXP,HUS,JEF,PES,VIP,XXX,SHV,VP3,CSD+PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you