This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
What do we need?
Piece of organza - about 4.60 x 5.45 inches - 2 pieces
A bit synthetic woll (just the size of the palm) - which we put into the angel's body.(Or something similar)
A piece of ribbon - about 7.8 inches
Glue gun, needle, thread.
Here you will find a video tutorial - https://www.facebook.com/100002572583449/videos/oa.2008210889425497/1435348093227596
Size hoop: 5x7 hoop
Size and stitches parts:
Part 1/ skirt fsl : 4.92x5.46 inches / 26820 stitches - we embroider 2 pieces
Part 2/ skirt organza: 4.88x4.96 inches / 22809 stitches - we embroider 2 pieces
Body: 2.74x4.90 inches / 14096 stitches - we embroider 1 piece
Head: 1.30x2.79 inches / 5248 stitches - we embroider 1 piece
Wing: 2.38x5.15 inches / 13626 stitches- we embroider 2 pieces
Hands: 4.56x2.93 inches / 13484 stitches: we embroider 1 piece
Ribbon Merry Christmas: 4.20x2.76 inches/ 10241 stitches
Ribbon Frohe Weihnachten: 4.20x2.76 inches/ 10434 stitches
Ribbon Joyeux Noël: 4.20x2.76 inches/ 9557 stitches
Size comlepte 3D angel - height - 7.48 inches and width 5.11 inches, lower skirt diameter -3.54 inches
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.