All collections

3D Poinsettia

$5.80

Difficulty: beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. 

To create Poinsettia we need:

3D poinsettia on the stem:
-Glue gun
-Flower wires green : diameter 0.078 inches ( 2 mm) - 1 piece and length 7.87 inches ( 20 cm )
- Floristic tape
- Pliers
Poinsettia for decoration:
- for the poinsettia as decoration you need a small piece of felt on which to glue the poinsettia - (0.196x 0.196 inches)

Size hoop: 5x7 hoop (You can also use just the parts for the 4x4 hoop to create a mini poinsettia.)

Size and stitches parts:
part 1 : 4.59x4.30 inches/20756 stitches - embroider 1 piece
part 2 : 4.04x3.94 inches/ 17183 stitches - embroider 1 piece
part 3 : 3.56x3.43 inches/13364 stitches - embroider 1 piece
part 4: 2.37x2.27 inches/ 7067 stitches - embroider 1 piece
part 5: 1.87x1.80 inches/3932 stitches - embroider 1 piece
paert 6 green: 4.89x4.80 inches/22746 stitches - embroider 1 piece
leaves: 3.15x2.89 inches/10546 stitches - embroider 1 piece
center: 0.59x0.65 inches/578 stitches - embroider 1 piece

formats: PES,CSD,DST,EXP,HUS,JEF,VIP,SHV,XXX,VP3,EMB+photo PDF instructions

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you