3D bell with poinsettia / two sizes / 6x10 and 5x7 hoop
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Needle and thread.
All our 3D bells have the same procedure for sewing - video here: https://www.facebook.com/100002572583449/videos/oa.2008205109426075/1435319329897139
Size and stitches :
6x10 hoop: 5.65x5.75 inches/37042 stitches
5x7 hoop: 4.96x5 inches/32236 stitches
6x10 hoop: 2.55x3.14 inches
5x7 hoop: 2.12x2.70 inches
The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.