All collections

3D African daisies (osteospermum fruticosum) FSL / 4x4 hoop

$4.60

Difficulty: Intermediate

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. 

For these flowers we will need:

-Glue gun
- wires green : I usedtwo wires a diameter of 0.236 inches ( 0,6 mm) and lenght of 11.81 inches (30cm)
- and wires green: 1.96 inches ( 5cm) lenght - two pieces ( for leaves)
-floristic tape
-wire cutting pliers

Size hoop: 4x4 hoop

Size and stitches parts:
part 1 af. daisy: 3.26x3.33 inches/12515 stitches
part 2 af. daisy: 3.26x3.33 inches/ 11132 stitches
leaves : 2.80x2.85 inches/6672 stitches
green part : 1.57x1.54 inches/ 3815 stitches

formats: PES,CSD,DST,EXP,HUS,JEF,VIP,SHV,XXX,VP3,EMB+photo PDF instructions

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you