Difficulty: Advanced

This is a large design that has many stitches and therefore experience with FSL embroidery is required.

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Glue gun, Clock to assemble - I used a wooden clock.

Size hoop:
10x10 hoop
7x12 hoop
8x8 hoop
6x10 hoop

Size and stitches in the hoop:
10x10 hoop : 9.84x9.84 inches/117454 stitches
7x12 hoop : 7x7 inches/84053 stitches
8x8 hoop : 7.85x7.85 inches/95065 stitches
6x10 hoop : 6x6 inches/71609 stitches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you