This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
The video tutorial can be found here-
I use a reinforced - Fixed felt 1 mm and a weight of 190gr./m2 I recommend using a felt of 1 to 1.2 mm (0.0394 inch or 0.0472 inch)
Size hoop : 4x4 hoop
Size and stitches:
part 1 house: 3.72x3.11 inches/ 10987 stitches
part 2 house: 3.72x3.11 inches/ 13227 stitches
part 3 house: 3.72x3.11 inches/ 17456 stitches
door+windows: 3.79x3.37 inches/ 31649 stitches
girlands: 3.87x3.86 inches/ 17520 stitches
mini leaves: 3.73x2.88 inches/ 14674 stitches
flowers: 3.81x3.73 inches/ 23600 stitches
leave roof ladybug: 3.31x2.98 inches/ 11374 stitches
leaves roof: 3.30x2.97 inches/ 10387 stitches
tree part 1: 3.78x3.88 inches/ 16685 stitches
tree part 2: 3.78x3.88 inches/ 16685 stitches
water well: 3.85x3.69 inches/ 10779 stitches
Stones - bottom parts:
stone 1: 2.91x3.01 inches/ 4898 stitches
stone 2: 3.65x3.54 inches/ 5987 stitches
stone 3: 3.61x3.17 inches/ 6083 stitches
stone 4: 3.73x3.17 inches/ 5962 stitches
stone 5: 3.45x3.69 inches/ 6472 stitches
stone 6: 3.82x3.58 inches/ 6574 stitches
Formats: EMB, CSD, DST, EXP, HUS, JEF, SHV, VIP, VP3, XXX, PES, CSD + PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.