This design is not FSL!

Difficulty: Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

We use wss stabilizer and I use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. I recommend using a felt of 1 to 1.2 mm (0.0394 inch or 0.0472 inch), glue gun.

Size hoop:
4x4 hoop

Size and stitches in the hoop:
tie green: 3.77x3.87 inches/4647 stitches
tie red: 3.77x3.87 inches/4274 stitches
bow green: 3.83x3.81 inches/3874 stitches
bow red: 3.83x3.81 inches/4013 stitches

Complete sizes:
tie green: 5.14x1.48 inches
tie red: 5.14x1.48 inches
bow green: 3.83x3.81 inches
bow red: 3.83x3.81 inches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider felt PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you