Difficulty: Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. 

What will we need:
-Glue gun
-Flower wires green : I used two pieces with a diameter of 0.023 inches (0,6 mm) or you can use one wire with a diameter of 0.047 or 0.059 inches ( 1,2 or 1,5 mm)
-Florist paper tape green with a diameter of 0.78 inches (2cm) and pliers

Size hoop: 4x4 hoop

Size and stitches pansies:
petal 1: 2.11x1.64 inches/6491 stitches - embroider 1 piece
petal 2: 2.34x1.40 inches/ 4814 stitches - embroider 1 piece
leav: 1.24x2.03 inches/3343 stitches - embroider 2 pieces
green back part : 1x0.98 inches/1311 stitches - embroider 1 piece

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you