Difficulty: Advanced

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. 

What do we need?

-The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread.
-For this design I used 100% cotton - 195gr / m2
You can also use high quality satin.
-ribbon - 11.8 inches -2 pieces

PDF tutorials in the ZIP file

Hoop: large design : 8x12 hoop and middle design : 6x10 hoop

Size and stitches:
Large bib: 7.46x7.56 inches / 58255 stitches
Middle bib: 5.92x6 inches / 48003 stitches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace+fabric PDF
Instructions for design PDF

This design can also be purchased in this set: https://embroiderybytm-designsbyteresa.com/collections/sets-for-baby/products/large-set-baby-designs-vintage

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you